China Lamella Clarifier for Wastewater Treatment - Suppliers & Factory Solutions
Features
- Maximized sedimentation area within limited footprint.
- High-rate clarifier for high SS water (grit, clay, lime & mental particles).
- Circular sludge hopper with sludge scraper to reduce total transportation height.
- Indoor or outdoor layout (environmental temperature should be over 0°C).
- Apply to automatic & continuous operation.
- Design life: Carbon steel material: >10 years; Stainless steel material: >20 years.
Advantage
Higher efficiency, smaller footprint
Inclined plates extended to 1.5m, separation efficiency improved (higher 1.5 ~ 2.0 times) comparing with radial flow clarifier and vertical clarifier and save 80% of area.
Excellent hydraulic conditions
No hydraulic corner and vortex, better precipitation performance.
Inclined plates Chokeless
Plates are of angle 60 degrees, spacing between 80 ~ 100 mm, back-washing device used.
Strong and durable
Inclined plates are breakless, collapseless. Adopt 6mm hard PVC board or 8 mm high quality PP board as special separation plate, module embedded installation, high strength, easy disassembling and maintenance.
Sludge discharge smoothly
No dead angle, sludge pump is recommended.
Frequently Asked Questions
What is the design life of the Lamella Clarifier?
The design life depends on the materials used: it is over 10 years for carbon steel and over 20 years for stainless steel.
How does the Lamella Clarifier achieve a smaller footprint?
By using inclined plates extended to 1.5m, it improves separation efficiency by 1.5 to 2.0 times compared to radial flow and vertical clarifiers, saving up to 80% of the footprint area.
What materials are used for the inclined plates?
The inclined plates are made of either 6mm hard PVC board or 8mm high-quality PP board, ensuring they are breakless, collapseless, and easy to disassemble and maintain.
Can this equipment be installed outdoors?
Yes, it supports both indoor and outdoor layouts, provided that the environmental temperature is kept above 0°C.
How is sludge discharged from the system?
Sludge is discharged smoothly without dead angles using a circular sludge hopper equipped with a sludge scraper to reduce transportation height. A sludge pump is recommended for optimal operation.
What type of water is this high-rate clarifier suitable for?
It is designed as a high-rate clarifier specifically for high SS (suspended solids) water containing grit, clay, lime, and metal particles.
