Leave Your Message

China Lamella Clarifier Suppliers - Efficient Inclined Plate Settler Factory for Waste Water Treatment

The Lamella Clarifier Inclined Plate Settler (IPS) is an innovative solution designed for the effective removal of particulates from liquids, making it an essential component in water treatment processes. As a superior alternative to conventional settling tanks, this technology is widely adopted in primary water treatment applications, especially for those seeking efficiency and reliability, Manufactured in China, our factory utilizes advanced engineering to create inclined tube and inclined plate systems, strategically designed with a 60-degree inclination angle. This design allows for optimal sedimentation, where suspended solids in the raw water accumulate on the inclined surfaces. The resulting thin mud layer is then naturally guided back down into the sludge suspension layer through gravity, eventually settling into the mud collecting bucket. From there, it is discharged through the mud discharge pipe for treatment or reuse, The process ensures that the clean water rises unobstructed to the water collection pipe, allowing for direct discharge or efficient reuse. As leading suppliers of water treatment solutions in China, we pride ourselves on providing high-quality lamella clarifiers that enhance water purification efforts across various industries

    Features

    • 1. Maximized sedimentation area within limited footprint.
    • 2. High-rate clarifier for high SS water (grit, clay, lime & mental particals).
    • 3. Circular sludge hopper with sludge scraper to reduce total transportation height.
    • 4. Indoor or outdoor layout (environmental temperature should be over 0°C).
    • 5. Apply to automatic & continuous operation.
    • 6. Design life: Carbon steel material: >10years; Stainless steel material: >20years.
    Lamella-Clarifier-3h60

    Advantage

    Higher efficiency, smaller footprint

    Inclined plates extended to 1.5m, separation efficiency improved (higher 1.5 ~ 2.0 times) comparing with radial flow clarifier and vertical clarifier and save 80% of area.

    Excellent hydraulic conditions

    No hydraulic corner and vortex, better precipitation performance.

    Inclined plates Chokeless

    Plates are of angle 60 degrees, spacing between 80 ~ 100 mm, back-washing device used.

    Strong and durable

    Inclined plates are breakless, collapseless. Adopt 6mm hard PVC board or 8 mm high quality PP board as special separation plate, module embedded installation, high strength, easy disassembling and maintenance.

    Sludge discharge smoothly

    No dead angle, sludge pump is recommended.

    Frequently Asked Questions

    Q: What is the design life of this Lamella Clarifier?

    The design life varies by material: over 10 years for carbon steel construction and over 20 years for stainless steel construction.

    Q: How does the inclined plate design improve footprint efficiency?

    By extending the inclined plates to 1.5m, the separation efficiency is improved by 1.5 to 2.0 times compared to radial flow and vertical clarifiers, saving up to 80% of the required footprint area.

    Q: What materials are used for the inclined plates?

    The system uses highly durable, breakless, and collapseless materials, specifically 6mm hard PVC boards or 8mm high-quality PP boards as special separation plates.

    Q: Can this system be installed outdoors?

    Yes, the system supports both indoor and outdoor layouts. However, for outdoor installations, the environmental temperature must remain above 0°C.

    Q: How is sludge discharged from the system?

    The system features a circular sludge hopper with a sludge scraper to reduce the total transportation height, ensuring smooth sludge discharge without dead angles. A sludge pump is recommended for optimal operation.

    Q: Does the system support automatic operation?

    Yes, the Lamella Clarifier is designed to apply directly to automatic and continuous operations.