China Lamella Clarifier Suppliers - Efficient Inclined Plate Settlers from Factory for Waste Water Treatment
Features
- 1. Maximized sedimentation area within limited footprint.
- 2. High-rate clarifier for high SS water (grit, clay, lime & mental particals).
- 3. Circular sludge hopper with sludge scraper to reduce total transportation height.
- 4. Indoor or outdoor layout (environmental temperature should be over 0°C).
- 5. Apply to automatic & continious operation.
- 6. Design life: Carbon steel material: >10years; Stainless steel material: >20years.
Advantage
Higher efficiency, smaller footprint
Inclined plates extended to 1.5m, separation efficiency improved (higher 1.5 ~ 2.0 times) comparing with radial flow clarifier and vertical clarifier and save 80% of area.
Excellent hydraulic conditions
No hydraulic corner and vortex, better precipitation performance.
Inclined plates Chokeless
Plates are of angle 60 degrees, spacing between 80 ~ 100 mm, back-washing device used.
Strong and durable
Inclined plates are breakless, collapseless. Adopt 6mm hard PVC board or 8 mm high quality PP board as special separation plate, module embedded installation, high strength, easy disassembling and maintenance.
Sludge discharge smoothly
No dead angle, sludge pump is recommended.
Frequently Asked Questions
Q1: What is the expected design life of the Lamella Clarifier?
A1: The design life of the clarifier is over 10 years when using carbon steel materials, and over 20 years when constructed from stainless steel materials.
Q2: What types of suspended solids (SS) can this high-rate clarifier handle?
A2: It is highly effective for high SS water containing grit, clay, lime, and metal particles.
Q3: How does the Lamella Clarifier save footprint space?
A3: By extending the inclined plates to 1.5m, the separation efficiency is improved by 1.5 to 2.0 times compared to radial flow and vertical clarifiers, saving up to 80% of the footprint area.
Q4: Are the inclined plates prone to clogging or choking?
A4: No, the plates are set at a 60-degree angle with spacing between 80 to 100 mm, and they are equipped with a back-washing device to ensure chokeless operation.
Q5: Can the system be installed outdoors in cold regions?
A5: The system supports both indoor and outdoor layouts, but for outdoor installations, the environmental temperature must remain above 0°C.
Q6: What materials are used to ensure the durability of the inclined plates?
A6: The system adopts either 6mm hard PVC board or 8mm high-quality PP board for the separation plates, using a module-embedded installation to prevent breaking or collapsing.