Leave Your Message

Eco-Friendly Bio Cord Filter Media from China Suppliers - Factory for Enhanced Environmental Treatment Solutions

The bio cord's ecological treatment effect is pivotal for effective environmental protection in China. Utilizing the biological contact oxidation method, it efficiently decomposes pollutants and waste gases generated during production and daily life. Our advanced technology enhances the natural ecological treatment process, promoting a sustainable ecological cycle. This not only accelerates ecological harmony but also boosts the processing capacity of existing biological treatment devices. As a leading factory and supplier in China, we are dedicated to minimizing the overall environmental load, contributing to a cleaner and healthier planet.

    Feature

    A large number of microorganisms can be fixed to form an ideal environment where they coexist. High treatment effect can be achieved through one-level treatment, which has been proved in many river ecological restoration cases.

    The radial structure is composed of numerous circular fibers, which can increase the surface area and adapt to the growth and reproduction of various microorganisms, so that the concentration of attached microorganisms can reach more than 150000mg / L, which is used in the treatment of high concentration ammonia nitrogen wastewater of a large electronic company.

    On its surface, ammonia nitrogen can be reduced by the proliferation of aerobic microorganisms, and biological denitrification can be carried out by the proliferation of anaerobic microorganisms inside the biological lace.

    The shape is rope shape, so the shape can be changed freely during setting. Biological lace is ring-shaped, which can avoid excessive peeling of biological film due to water impact.

    Shaking in the wastewater can not only absorb the dissolved oxygen in the water, but also improve the contact efficiency with the water and the removal rate of organic matters.

    Not only in the treatment of low concentration wastewater, but also in the high concentration reaction tank which is easy to be blocked by contact materials.

    It can attach a large number of microorganisms, so it can also be used in a small-scale reaction tank.

    How to install

    The vertical and horizontal spacing of packing support is 100-200mm.

    The braided packing is fixed by PE / PP tie directly on the packing bracket. The braided packing does not need to be cut, but can be attached 100-200mm along the bracket and fixed again.

    There are two ways for the biological rope to be set in the aeration tank: the first is the split flow type, the packing is installed on one side, and the other is aeration; the second is the direct type, the aeration device is directly installed under the biological rope packing, and the water and air are mixed.

    The installation spacing of split type is 100-150 mm, and that of direct type is 150-200 mm.

    Frequently Asked Questions

    What is the primary benefit of the radial structure of biological lace?

    The radial structure consists of numerous circular fibers that drastically increase the surface area. This allows a high concentration of attached microorganisms (exceeding 150,000 mg/L) to grow and reproduce, which is highly effective for high-concentration ammonia nitrogen wastewater treatment.

    How does biological lace facilitate biological denitrification?

    Aerobic microorganisms proliferate on the outer surface to reduce ammonia nitrogen, while anaerobic microorganisms grow inside the ring-shaped biological lace to carry out biological denitrification.

    What spacing is required for the packing support during installation?

    The vertical and horizontal spacing of the packing support should be maintained between 100mm and 200mm.

    How do you fix the biological rope packing to the bracket?

    The braided packing is fixed directly to the bracket using PE or PP ties. The packing does not need to be cut; it can be run 100-200mm along the bracket and secured at intervals.

    What are the differences between split flow type and direct type aeration installations?

    In the split flow type, the packing is installed on one side and aeration is on the other, requiring a spacing of 100-150 mm. In the direct type, the aeration device is placed directly beneath the biological rope for mixed water and air contact, requiring a spacing of 150-200 mm.

    Does the shape of the biological lace prevent biofilm loss?

    Yes, the ring-shaped structure of the biological lace is specifically designed to prevent excessive peeling and loss of the biological film caused by strong water impacts.